PAMIR PAINT ROAD LINE PAINT

PAMIR PAINT ROAD LINE PAINT, Calcification And Corrosion
PAMIR PAINT ROAD LINE PAINT, Calcification And Corrosion

FORS JOKER Border, Column and Wall Paint Product Definition: It is a modified alkyd resin based, single component, solvent based border, column and parking lot wall paint. Usage Area: It is used for marking and painting the stones on the median and roadsides on the walls of sites, apartments and parking lots. Method of Application: The surfaces to be applied must be cleared of loose and loose textured layers and free dust. Dust, dirt and oil on the surface should be cleaned. The application surface must be absolutely dry. It should never be applied to damp or wet surfaces. It is ready to use without thinning. Optionally, PMR Fors Joker is diluted with 5-10% PMR Fors Thinner by volume, mixed homogeneously with the help of a drill, and applied as 1 coat with a roller, road marking tools or airless gun. In the optional second coat application, a minimum of 30 minutes should be waited between the coats depending on the ambient temperature and humidity. Technical Specifications: General Information Appearance Matte, colored, cold road marking paint Structure Modified alkyd resin based Density ~1,60 gr/cm3 Thinner Road Marking Paint Thinner Thinning Ratio 5-10% Color White, Yellow and Desired Color Application Information Application Temperature 20°C, 50% RH Drying Time Min. 15 - 20 Minutes (20 oC, 50% RH) Bottom Dry Max. 45 Minutes (20 oC, 50% RH) Consumption 0.200-0.300 kg/m2 (Depending on Application Thickness) Application Layer 1 Layer (Optionally, 2 layers can be applied) Application Tools Roller, Airless Gun Considerations in Application: Paint before use, should be mixed until it becomes homogeneous in the box. Surface problems may occur in applications performed in environments below +5 oC and above +35 oC. Application surfaces must be dry and clean. The application should be made according to the specified Application specifications. It should not be thinned more than 5 - 10%. Waiting times between coats must be observed. Cleaning of Application Tools: Application tools should be cleaned with PMR Fors Thinner immediately after use. Safety Warnings: S2 Keep out of reach of children. S16 Keep away from sources of ignition – No smoking S36/37/39 Wear suitable protective clothing, gloves, eye/face protection. S46 If swallowed, seek medical advice immediately and show the container or label. S51 Use only in well-ventilated areas. S60 Dispose of this material and its container as hazardous waste S62 Do not induce vomiting if swallowed. Immediately seek first aid service, show container or label. Risk Warnings: R11 Highly flammable. R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation. R63 Possible risk of harm to the unborn child R65 Harmful: may cause lung damage if swallowed R67 Vapors may cause drowsiness and dizziness.

Warning: It is recommended that you do not make any payment (deposit, advance, etc.) before visiting the actual area (workplace, shop, etc.) where the advertiser offers his goods and services to the relevant parties and before receiving the goods and services you want to buy.