WASTE FERTILIZER DRYER

WASTE FERTILIZER DRYER The product is applied and spread on the upper band surface. The top band is to promote the product and contact simultaneously with a surface for drying. The shafts with the product on the motion communication drying line have a fluid bed drying effect. The fluid product is heated and dried with the air duct flowing over the product in the opposite direction. Drying ensures that the bed is mixed and the product is dried at the same rate, according to the product by loosening it while the lumps are dissolved. The second volume of preheated and pre-dried product is contacted with cross-flow air and dried to equal desired residual water content. Variable temperature setting range, for example, grass seeds at 40 °C and sewage sludge can be dried at 80 °C. Also, this drying system makes the most of the air, water absorption capacity. Working mode: it is speed controlled and can be adjusted between eighty percent humidity and ten percent humidity of the product. The gas coming out of the machine can be used for the combustion unit or any production with a special maintenance system. combustion unit and other materials belong to the buyer company. Our machine has been designed in accordance with the conditions of the Ministry of Environment. There is almost no odor at the exit of our machine. The capacity of the machine is 10 tons per hour. Technical Specification The total length of the machine is 16 meters. The width of the machine is 2 meters The height of the machine is 2.80 meters The electrical connection of the machine is 380 kW. The electrical consumption of the machine is 10 kW per hour. The resistance system of the machine is a custom made ceramic resistance.