SCROLL

1- Medical, dental, laboratory, paint, food industries and wherever oil-free air is required 2- 10.000 hours maintenance-free 3- Very quiet 4- Oil-free 5- Low vibration 6- Low maintenance cost 7- Low usage torque 8- Integrated cooling fan It is designed according to the oil-free working principle according to the power ranges from 0.75kW to 4kW according to the operating pressures of 7/10 bar. Compressor head group is provided by Japanese Annest Iwata company. It is driven by V belt-pulley. V-belt tension can be adjusted easily with the belt-pulley tensioning system. Compressor ; Up to 4 kW motor power types are started directly with a motor protection switch, and 5.5 kW and above motor power types are started with a star-delta control panel. The compressor is driven by a F-insulated, IP55 protected, IE2 efficient, asynchronous electric motor. The cabin has been designed according to the most suitable usage conditions: Vibration is minimized by using rubber wedges in various places. Noise is minimized by covering the interior surfaces of the cabin with fireproof sound insulation sponge. Easy service applications are provided with the push on-off locking system of the cabin doors. It is air cooled: Cooling is provided by coiled copper intercooler pipes and a fan mounted inside the cabinet. The pressure control of the compressor is realized by the pressure transmitter and microprocessor control unit in the K2 series and later series. The pressure status can be monitored from the control unit. The pressure control of the compressor is provided by the pressure automatic in the K1 series. Compressor operating hours are monitored by counting hours in K1 series and by microprocessor control unit in K2 and later series. With the safety valve adjusted to +1 bar of the compressor operating pressure, the system is assured against excessive pressure. In the K2 series and later series, the internal temperature control of the layers with the Motor-scroll blocks is provided by the heat thermostat and the microprocessor control unit. In the K2 series and the following series, the air outlet temperature is controlled by a temperature thermometer and a microprocessor control unit. The air filter element is placed in the filter container that allows easy replacement. The condensation accumulating in the collector system is discharged with a mini ball valve. The air tank is supplied separately from the compressor unit as galvanized. With the one-way check valve included in the compressor system, the air of the system is prevented from returning to the compressor again. The multi-operation control of the compressor is carried out by the microprocessor control unit.