TÜRKİYE / İSTANBUL
Warning: It is recommended that you do not make any payment (deposit, advance, etc.) before visiting the actual area (workplace, shop, etc.) where the advertiser offers his goods and services to the relevant parties and before receiving the goods and services you want to buy.
It is an expert in removing moisture that cannot be seen with the naked eye and in air conditioning solutions. Excess moisture causes corrosion of the metal. In addition, humid environments cause negative environments such as rotting and rapid corrosion. With Remote Control Humidity Sensor Devices, the humidity rate in the indoor environment can be fixed homogeneously, continuously, at a certain humidity, and by connecting with air ducts, appropriate humidity conditions in the environment are ensured. The heart of the dehumidifier is the highly efficient and durable silica-gel rotor. There are many air channels on the rotor parallel to the shaft and it provides high efficiency in holding water vapor with its very large surface area. The rotor is not affected by oversaturation in any way. Therefore, Industrial Dehumidification Machines work at high humidity and capacity without reducing the capacity of the rotor. Silica-gel dryer rotary rotors are used as standard in all EGM devices. Thanks to its strong chemical components, the silica-gel dryer rotor used by egm ensures high quality and long life. These Rotors maintain their original capacity in continuous operation for 8-10 years. Silica-gel desiccant rotor is the most important part of the dehumidifier. It determines the capacity, efficiency and life of the dehumidifier. • Models from 1,000 m³/h to 18,000m³/h. • Pre-cool and after-cool versions according to needs. • Strong design with steel case and bolts. • Easy disassembly and assembly of spare part materials. • Large air inlet grilles and filters. • Adjustable dehumidification capacity and air outlet temperature setting. • Suitable for indoor and outdoor use • Dry air pressure up to 1200 pascals. EGM SERIES DH 3000 DH 5000 DH 8000 DH 10000 Dehumidification Capacity 14.4 kg/h 32.0 kg/h 52.4 kg/h 62.0 kg/h Process Air Volume 3,000m3/h 5,000m3/h 8,000 m3/h 10,000 m3/h Reg. Air Heater Capacity 30kW 45 kW 60 kW 70 kW Reg. Air Fan Motor 2.2 kW 3 kW 4.0 kW 5 kW Process Air Motor 3.0 kW 4.0 kW 5.5 kW 8.0 kW Rotor Motor 0.09 kW 0.09 kW 0.09 kW 0.09 kW Max. Electrical Capacity 36 kW 53 kW 70 kW 84 kW Height 1.100 mm 1.200 mm 1.270 mm 1.450 mm Width 900 mm 1.100 mm 1.180 mm 1.300 mm Length 1.800 mm 2.300 mm 2.750 mm 2.950 mm Weight 580 kg 850 kg 980 kg 1.150 kg Electricity 380V 60 Hz -230 / 380 V - 50 Hz (For Ships) Air Inlet 150 mm 200 mm 265 mm 300 mm Dry Air Outlet 165 mm 217 mm 275 mm 310 mm Air Pressure (max) 1100 Pa