SUMAK SMK220-S HOT WATER DOUBLE STAGE CENTRIFUGAL PUMP

SUMAK SMK220-S HOT WATER DOUBLE STAGE CENTRIFUGAL PUMP, Centrifugal Pump Models
SUMAK SMK220-S HOT WATER DOUBLE STAGE CENTRIFUGAL PUMP, Centrifugal Pump Models

It is produced for use in hot water up to 90°C. The water wheel is made of AISI304 Stainless steel. They are double stage, high altitude pumps. This type of pumps, suction from a depth of 6 m and a maximum of 53 m. They are ideal pumps used for pressurized water up to height, for agricultural irrigation, for booster purposes in buildings up to 8 floors and 32 flats, for gas stations, social facilities and clean water supply in constructions. Plumbing Materials If your pump is sucking from the same level or higher code, you must use a check valve in the suction line. Check valve must be used in the discharge line of the separator pump. Click to buy check valve. If your pump is sucking below its own level, that is, from the negative code, a damper must be used to prevent air. Click to buy a valve. You can purchase a strainer to prevent your pump from being damaged by the impurities formed in the water at the time of suction. Click here to buy a strainer. Click here to take a look at the other fasteners you will definitely need. HP : 2.2 HP kW : 1.6 kW Voltage : 220 Volt (Monophase) Max. Flow rate m3/h: 6-10 m3/h Max. Height mSS: 51-75 mss Input Size: 1.1/4" - 32 mm Output Size: 1" - 25 mm Revolution R/D: 2900 rpm

Warning: It is recommended that you do not make any payment (deposit, advance, etc.) before visiting the actual area (workplace, shop, etc.) where the advertiser offers his goods and services to the relevant parties and before receiving the goods and services you want to buy.